When it comes to desoldering complicated and small electronics circuit boards, the best desoldering station is the key tool to desolder. You can easily troubleshoot printed circuit boards, SMD, SMT, and all other small electronic boards. Desoldering stations work based on melting the solder with a hot air gun and sucking it by a desoldering vacuum pump.
The best desoldering station is a gun that sucks the solder from any part of the component of the circuit board when you press the trigger button. These desolder stations work better than other desoldering tools; the following are some features.
- It is easy to maintain and clean.
- Gives an accurate and precise performance.
- It is best for complicated circuits.
There are a lot of options available in the market; to choose the vacuum desoldering station; you have to look at the following factors:
Temperature range: The main function of the station is to provide the required temperature to melt the solder. The temperature ranges from 300C to 900C; you can set the temperature according to the need of the circuit. These desoldering stations have adjustable temperature settings; Choose a desoldering station with a wide range of temperatures.
Suction power: It is another key factor to remember; the melted solder needs the best sucker. A best Vacuum desolder station allows you to suck all the melted solder efficiently; with this function, you can save your printed circuit boards.
Extra tools: It is always better to get some extra with the best budget desoldering station; some added accessories can help you in soldering and desoldering. Different sizes and shapes of tips and tweezers are included as extras; These tools will help you with complex circuit boards.
Warranty: All electronic devices need to spend more lifetime span; it is the most important factor. Most good brands give one year warranty; so, choose the best brand desoldering station with more warranty.
We have listed the following products, keeping the above-mentioned key factors. You need the best one according to your need, so here are some suggested products:
Top 3 Best Desoldering Stations 2021
Table Of The Desoldering Station 2021
Review Of Best Vacuum Desoldering Stations 2021
Here is a list of what the unit comes with:
- The station/unit itself
- The gun attachment
- Power cable
- Gun holder
- Silicon grease in a syringe with no push handle
- 5 sponge filters
- 2 spring filters
- 3 nozzles in different sizes
- Cleaning tool
- Cleaning drill bit + handle
- 2 spring filter bases
This 70 watts High Powered Station with a long life Ceramic heating element Atmega8A Microprocessor from Microchip and a proprietary software proportional control of the temperature. Very easy intuitive user interface with large LED Display. 12 Volt high Flow Vacuum Pump that produces up to 15 L/min.
The tools have zero-crossing circuitry to prevent electrical surges. CE Certified and ESD Safe. It uses low voltage for the desoldering iron and vacuum pump.
It has several advanced features such as digital calibration and configurable auto-sleep function adjustable from 1-60 minutes.
2. Pro Digital Vacuum Desoldering Station, Anesty Professional Removal Rework Station ZD-915 Iron Gun Built-in Vacuum Pump
It is a complete soldering and desoldering vacuum suction station. Well packed. The main power unit feels solid. The gun is very lightweight. It comes with replacement filters, cleaning wands, plus three nozzles. The gun is easy to hold, and the cords are flexible.
There is plenty of room for slag. It has a strong vacuum pump. I used this tool to fix my circuit board, and it worked beautifully. It was of great value. Decent suction. I practiced on a couple of scrap boards and worked like a charm.
The vacuum station is designed for solder desoldering especially. The quick heating and strong power are convenient and clear soldering/desoldering of all types of DIP components.
Reasonable structure, single-hand operation, and strong absorbing power can easily remove the residual solder from one-sided or two-sided PCB.
The desoldering iron gun is controlled automatically by the microprocessor.
The heating element is made of PTC, and the sensor on the desoldering tip can control the desoldering temperature quickly and accurately.
This Pro Digital Vacuum Desoldering Station with one year warranty and 60 days money-back guarantee.
- Professional level desoldering station.
- It will display temperature in C and F.
- It has non-volatile memory that retains all the settings at power off.
- Vacuum desolder and soldering gun/station.
- The glass tube is a little hard to remove for cleaning.
When it comes to soldering electronics, a high-quality desoldering tool is equally important as any soldering equipment.
The Hakko FM 204 desoldering station features everything you need for any through-hole soldering. The application includes a built-in vacuum pump, a lockout key card to prevent accidental or unauthorized temperature setting, sleep mode functionality engaged when the handpiece is placed back into the holder, and a gun or pencil style desoldering handpiece.
The FM 204 desoldering handpiece features superior heat transfer and thermal recovery. A quick change nozzle heater cartridge and easy to remove disposable can easily be converted from a gun to pencil configuration.
This best vacuum desolder station easily to use; when the set temperature has reached, a buzzer will sound, and a heater lamp on the front panel will start blinking, indicating the unit is ready for use position the nozzle over the solder joint to be as soon as the solder has melted extract the solder by pressing the trigger button in the handpiece as a bonus the Hakko FM 204 also be used for soldering with the Hakko 204 soldering handles the Hakko 204 desoldering and soldering station in one.
4. YIHUA 948 ESD Safe 2 in 1 80W Desoldering Station and 60W Soldering Iron- Desoldering Gun and Soldering Station °F /°C
Proceeding the best desoldering station reviews YIHUA 948 is a best soldering and desoldering tool; A dual-function tool. It is a user-friendly tool with outstanding features like; sleep function, automatic shutdown, digital temperature correction, C/F temperature display.
This best soldering and desoldering station have a PID temperature control system; it provides real-time correction. This function minimizes the temperature error up to the lowest extent to achieve essential stability.
This vacuum desolder station has a good intelligent detection mechanism; it can detect the status of its parts or change automatically. It provides you a message like “S-E”; it means that the sensor is faulty, and the “pht” message indicates preheating the gun properly.
It comes with the following parts:
- Main station
- Soldering iron
- Desoldering gun
- Four Desoldering gun nozzles
- Two Sets of cleaning pens
- Silicon pad
- Ceramic filter
- Two filter pipes
- Soldering iron: 60W, temp range: 662-896F/350-480C
- Suction gun: 80W, temp range: 392-896F/200-480C
- Vacuum pump pressure: 0.05MPa (375mmHg)
- Voltage: 110V- 127V
- Frequency: 60Hz (USA plug)
- Decent desoldering station
- Dual function of soldering and desoldering
- It Comes with Replacement parts.
- Ideal for hobbyists
- It supports one device at a time.
The vacuum pump is not up to the mark.
SRA is well known for soldering products; it is working for the past 60 years; it produces a wide range of soldering and brazing products. YOU 701A++ is an amazing soldering and desoldering station, having high performance, intelligent functions, and ESD safe.
A high-powered (70W) desoldering station with a long-life ceramic element helps you in desoldering process. A 12V high flow vacuum pump that produces maximum suction power up to 15 L/min can easily suck the melted solder from the circuit board.
This dual-function soldering and the desoldering station have zero-crossing circuitry to prevent electrical surges. A 70 -Watt soldering iron with a smoke absorber keeps the fumes away. You can control temperature ranges from 200C-480C by the microprocessor from the microchip.
The following are the key features:
- Microprocessor-controlled ESD safe equipment
- 3-IN-1 repairing system
- Digital display and control
- Digital calibration for temperature control (200C – 480C)
- Auto sleep mode from 1 to 60 minutes
- Item weight is 13 pounds (5.8Kg)
This best budget desoldering station includes:
- The main station.
- Soldering iron with the smoke absorber.
- Soldering iron stand.
- Soldering iron holder.
- Desoldering gun.
- Desoldering tips (S, M, L).
- Desoldering gun holder.
- Nozzle cleaning pin.
- Filter (6Pcs).
- A tube of Greece and a user manual.
- Useful for desoldering through -holes components
- It gets hot fast
- Excellent solder sucker
- Best budget soldering and desoldering station
- There is one input only
- The soldering pencil is not that much better