The best soldering iron for circuit boards and electronics must have wattage between 40 to 70W, and you need to choose the correct tip size for the circuit boards soldering projects.
The selection of the best soldering iron for circuit boards, electronics is a complicated process. As technology has improved over the years, so has the design and construction of circuit boards, allowing for smaller, more complex components and thinner, less bulky panels.
Best Soldering Iron For Circuit Boards
This makes the circuit board repair process particularly complicated because there are many different types of varying sizes and designs. The best soldering iron for the electronic board must have the best soldering tip and excellent control over the temperature adjustment.
Here is the list of best types soldering iron for circuit boards.
Table Of Best Soldering Iron For Circuit Boards
Top Pick Best Soldering Iron For Circuit Boards
Review Of Best Soldering Iron For Circuit Boards
Genuine Hakko’s FX-888D is the modernised, digital version of the popular FX-888 and includes numerous new features-digital calibrations to simplify the setup and operation, further password protection, five preset temperature storage, and compact design takes up less workbench space.
The Soldering iron with wattage 50W will provide sufficient heat for most soldering projects on the circuit boards. Soldering irons with higher wattage (40W -70W) are better for the circuit board soldering. The Hakko FX-888D is 70W and has adjustable temperature control, range: 120° – 899°F (50° – 480°C) and Maintains idle temperature within 1.8°F.
You can use this for various applications, from soldering tabbing wire on delicate solar cells, soldering circuit boards part, soldering components on perf boards to soldering wires of various wires together. Temperature control is a necessity for these various uses, and the Hakko soldering iron works great.
The FX-888D delivers excellent thermal recovery by using T18 series tips for their terrific heat conductivity. This enables soldering at a lower set temperature and reducing the thermal impact on parts and tip oxidation that can shorten tip life.
The iron cable is friendly soft silicone, which handles and moves the iron easy as the wire won’t stiffen up, twist, or get in your way. Fixed irons with their stiff cables retain the bends and twists that they get, so you might knock something off your desk that’s three feet away. But not with the Hakko, and it’s those little things that make this unit a joy.
The iron holder comes with a sponge and wire, which makes cleaning off the iron very easy. It’s also a very stable feeling and made of metal, so it feels like a quality stand.
- Digital calibration
- Low-temperature alarm
- Adjustable temperature control, range: 120° – 899°F (50° – 480°C) and Maintains idle temperature within 1.8°F
- Ceramic heating element and sensor ensures rapid heat-up temperature and fast thermal recovery.
- Slender, lightweight, ergonomic iron handles and compact station design takes up less bench space.
- A wide selection of tips available for soldering SMD and through-hole applications
- ESD Safe
- Only in 2 colours
- Only two buttons for all set.
This soldering iron has some pretty slick features that don’t present in the other older soldering iron stations. First off, the temperature seems a lot more stable than many other soldering irons for circuit boards.
The best temperature of soldering iron for the circuit boards and electronic is 600°-650°F (316°-343°C) for lead-based solder and 650°-700°F (343°-371°C) for lead-free solder.
You want the tip hot enough to melt the solder efficiently, but excess heat can burn components of the circuit board as the heat goes along with the leads, and it will decrease the life of the soldering tip.
According to Weller, WE1010NA is 40% more potent than other soldering irons. The temperature accuracy is critical with some printed circuit boards. Apply too much or little heat, and you risk permanently damaging the circuit board and its traces.
It is the temperature stable ( rated at +/- ⁰F), allowing an accurate temperature setting. This 70W Weller soldering iron is best for electronics, automotive wiring, and circuit board.
- Faster heat-up and recovery
- Digital LCD soldering iron station.
- Intuitive navigation
- Simple tip change-outs
- For Professionals, prosumers, or education
- 1 year limited warranty
- Great temperature stability.
- Easy and comfortable.
- There is no main line fuse.
- The handle may get hot.
X-Tronic soldering iron station is one of the best soldering station for electronics, circuit boards, automotive wiring, and Arduino.
This station is packed full of features for the best possible experience. It’s 60 Watts soldering iron for electronics. It is an ergonomic grip and temperature range of 392 to 896 degrees F. The iron can easily handle most tasks and small soldering iron for electronics and circuit boards.
There is a holder for both the iron and solder roll, and a brass tip cleaner, cleaning flux, and sponge are all nestled into the base.
The LED can switch between Fahrenheit and Celsius and includes a 10 min sleep timer and auto cool-down feature.
The features of these products are simply remarkable as it comes with LED digital display. It has 10 minutes sleep function, which means that if you stopped using the iron for 10 min, it would automatically go to sleep.
This kit is the best soldering station for hobbyists, professionals, experts, and beginners to complete complex tasks with ease.
Since its an extra neck product, the durability and high performance of the machine are invincible.
You need to choose the best tip that’s fit with your soldering iron. You also need to figure which style of the tip is best for your circuit board project. In addition, you need to determine the correct tip size because, if it’s too small, heat will not be transferred efficiently and, if it’s too big, you can overhang the pad and damage the circuit board.
Therefore, the X-Tronic XTS-4010-2 comes with a 1 – TI Soldering Tip already mounted in the Soldering Iron and 5 Extra Sizes/Styles. The 5 Extras are the Following Sizes/Styles:
- 1 Each – T-I
- 1 Each -T-B
- 1 Each -T-3C
- 1 Each -T-2.4D
- 1 Each – T-K
- It is an expensive but premium quality product.
- 60 watts soldering iron.
- Heat-resistant organic grip.
- The temperature range falls between 200 C to 483C.
- It has 10 minutes of sleep function.
- Two helping hands.
- The soldering tip cleaner with rosin flux is glued into the set.
- A slight touch on the knob changes the temperature by several degrees.
It is one of the cheap soldering iron kits for electronics. It will give you everything you need to replace the components on a circuit board. The soldering iron is temperature adjustable and very easy to use.
This soldering iron is best on small electronic project boards activity that required a much finer tip. It comes with five different soldering tips.
LDK soldering iron kit for electronics included:
- Adjustable Temperature Soldering Iron
- Five Extra Different Soldering Tips
- Solder Wire
- Anti-Static Tweezers
- Solder Sucker
- Cleaning Sponge
- Soldering Iron Stand
- User Manual
If you do electronics as a hobby, I suggest you to buy this small soldering iron for electronics and circuit board.
- Temperatures ranges from 200℃ to 450℃ (392℉ to 842℉ ).
- Cheap, great for the small projects.
- Portable and easy to use.
- Complete kit for small soldering job.
- The stand is really a bit thin
- Does not include wire strippers or case.
We have another best soldering iron for circuit boards, an excellent choice for repair home appliance, earphone, pyrography, printed circuit boards, cell phones, jewelry, guitar, tv capacitors and all small electronic work. Tabiger soldering iron kit will never disappoint you; it has been a choice for many professionals.
This 60W soldering iron kit for circuit boards features an advanced ceramic printed heater to provide a quick heat to the task’s requirement. It has an adjustable temperature range from 200C to 450C with large venting holes makes it more efficient; you can adjust it with a temperature knob. There are five interchangeable tips with this soldering iron for a circuit board for different soldering project needs.
An upgraded one-handed use de-soldering pump made of aluminium; you can cock it and press the trigger with one hand. A high-pressure vacuum can easily remove solder from the printed circuit boards, Arduino boards and all other small circuit boards. This basic soldering iron kit comes with the following package:
- Soldering iron (power 60W, voltage 110V)
- Five soldering tips (900M series model)
- Soldering wire (60% tin, 2% flux, 0.8mm D, 0.71 ounce)
- De-soldering pump (made of plastic and aluminium alloy)
- Soldering stand (Y style, made of steel)
- Anti-static tweezers (ESD-15, length 4.7 inches)
- Tool case
A multifunctional, durable plastic toolbox helps you carry all the small tools; avoids damage to the tools with an inner protective layer. The company provides a 12 months warranty and free lifetime customer support. The following tips will help you to buy this product:
- Best for small electronic board/ PCB
- Great value for the money
- Heats up fast and maintains temperature
- Ideal for beginners
- The case is a bit smaller
- comes with low-quality solder
VASATR is another best circuit board soldering iron made of the iron-plated tip, and stainless steel confirms the quality of the products and properties of the firmness and reliability. This is a widely used soldering iron for computer repairing, weld circuit boards, home appliances, home DIY hobbyists, and other soldering jobs.
This is the best soldering iron for Arduino circuit board; it has an excellent soldering gun; easy to operate, no need for a soldering station, plug, and play. When the soldering iron is plugged in for the first time, smoke will appear from the tip end. The smoke will stop in a while and will never come again.
It heats up quickly within 15 sec and has large venting holes for better heat dissipation efficiency with its upgraded steel pipe design. This professional soldering iron has adjustable temperature soldering iron ranges from 200C-450C with a special thermostat circuit to control the temperature; you can adjust it by knob wheel.
Five different tips make soldering iron easy for different tasks like guitar, computers, hardware, TV capacitors, and other accessories. This best soldering iron under $100 comes with the following package:
- Soldering iron (length: 7inch)
- Five soldering tips
- 60/40 solder pack
- Anti-static tweezer
- De-soldering pump
- Cable length (59 inches)
The chip fixed resistor is used in the soldering iron, which makes the soldering well. These qualities make the Vastar different: it is equally best soldering iron in the UK, USA, Canada, Philippines, India, and worldwide.
The following tips will help you buy this amazing product:
- Best for circuit boards/ Arduino boards
- Heats up fast
- Good value for the money
- Comes in organized form in a case
- Comes with no power switch
- Lack of stronger holder
LEXIVON is the best type of soldering kit for circuit boards; it is butane filled torch kit used by professionals for many soldering and welding jobs. You can use it for wire soldering, pyrography, jewelry repair/making, and even for delicious crème Brulee; this 13-piece accessory butane torch is set to use in a wide range of applications.
This multipurpose soldering torch has precise performance for all your tasks; adjust the flame from ½” to 2 1/2″ with a temperature range up to 2400F and up to 1100F using soldering tips. It is a 100% cordless and convenient soldering torch; you can carry it wherever you want.
Its fuel tank is 100% made of metal and easily refillable; it lasts longer. You can refill it within 10 seconds; the tank’s large capacity with butane gas allows up to 75 minutes of run time. The tank has been pre-tested for leakage and ignition capabilities. This amazing wireless butane torch comes with the following components:
- A wireless butane torches
- 6 handy tips for soldering, cutting, shaping, hot air, wide blower, and deflector tip
- Protective cap
- Sponge for easy cleaning
- Soldering kit with wrenches, solder, and tin.
The advanced electronic self-ignition trigger makes an easy start-up and makes your solder torch cent percent hassle-free. There is no need to carry your soldering with a cord; it is totally cord-free, easy to carry, and solder jobs. The product is designed with an ignition stopper under the US. CPSC- child resistance standard requirements to meet the high level of safety.
The following are few facts that will let you buy the best soldering kit under $ 100:
- Best for circuit boards
- Corded free soldering kit
- Easily refillable (Within 10 sec)
- It lasts for 75 minutes
- Leakage proof tank
- It comes without butane gas
- No holder
This UY Chan TS100 digital soldering iron is unrivalled in portability, performance, and efficiency. It comes in a very portable and comfortable size fitting for repairs of any circuit boards in whatever condition, both for DIY hobbyists and professionals alike.
The TS100 is an excellent little soldering iron and performs very well. This iron heats up lightning-fast, works extremely well, and has a nice suite of features available through the onboard software and OLED display. The user interface consists of two buttons, A and B, and the operation and menu system is relatively intuitive.
This soldering iron allows you to reprogram it. By connecting it to a computer system, you can reset the temperature rising curves and custom functions.
The soldering iron is powered by a 4S battery and an XT60 cable, making it easy to carry out field repairs only that the battery and cable do not come to the soldering station.
It has a rapid heating capacity and what excited me about this soldering iron is its sleep mode and the automatic over-heating warning. As a newbie, you would enjoy using this soldering iron.
You can power this soldering iron with other sources like a power bank, car power, or a 12-24V power source. This product is the best example of a digital circuit board soldering iron.
If you are not on a budget, I recommend you buy this UY CHAN Upgraded Original TS100 Digital Soldering Iron. It goes for a low price. Perfect for small electronic jobs due to size, but also capable of enough power output and a different assortment of tips for normal-sized jobs as well.
The soldering iron station includes a soldering handle, BC2 Tip, US standard power supply, and a soldering stand.
- Tiny! Very easy to hold
- Digital display for accurate temperature adjustments
- It has an accelerometer that starts cooling down the iron if not moved for a few minutes
- USB plug-in to change settings (NOTE: power is not supplied through the USB)
- GetFPV has the perfect XT60 to 2.5mm barrel connector so you can connect your lipo for field repairs
- Small power code
- The wire is not flexible
SYWON electric soldering iron can surely satisfy your all need for soldering and de-soldering in search of the best soldering iron for the circuit board. You can easily solder Printed circuit boards, loose wires, circuits for small gauge, LED lights of many types, TV capacitors, RC cars, micro drones, and many other soldering jobs.
This small soldering iron for electronics works at adjustable from 200C to 450C (392F-842F); five extra 900M series tips are provided for different purposes. The inner-heated ceramic heated technology makes the soldering iron heat up rapidly; it reduces energy consumption and maintains temperature stability. There are two (Red and Green) indicators for temperature scales.
The upgraded heat insulation stuff and steel- pipe design will keep the iron safe from being melted due to overheating. Ventilation holes of solder tips can help heat dissipation; the silicon handle cover is made comfortable, and you can easily handle it. This soldering iron for circuit boards come with the following package:
- Soldering iron
- Five extra soldering tips (General 900M series)
- Two ESD safe tweezers (ESD-10, ESD-15)
- One solder sucker
- One tin wire tube
- One soldering holder
- PU leather bag
- Six Pcs double-sided solder assist tools
A PU leather bag helps you carry these all tools together; this is a great gift idea for DIY lovers, electric repairs, home repairs, beginner practice, and printed circuit boards. The following are few facts that will let you buy this iron for circuit boards:
- Best soldering iron for circuit boards
- It comes with six extra solder assist tools
- Small soldering iron with great work
- Good value for the money
- Ideal for beginners
- Does not come with flux.
- The handle of iron gets hot a bit.
The search for the best soldering kit for circuit boards is not yet over; we have the most rated ANBES soldering kit with unique features. It is beneficial for repair home appliances, repair earphones, repair computers, pyrography, repair cell phones, welding a circuit board, and good soldering iron for electronic circuit boards.
This superior professional soldering iron has an adjustable temperature range from 200C-450C; its heat up fast and works great. There are five multiple tips (900M series) replacement, heat, and impact-resistant design of screw thread so that iron head does not drop easily.
The common wattage for a circuit board is between 20W-60W; this is the best soldering iron wattage for a circuit board. It is 60W soldering iron and voltage is 110V with the complete set of tools, you don’t need to buy any other accessories. This 14-in-1 soldering kit comes with the following package:
- Soldering iron
- De-soldering pump (plastic and Aluminum alloy)
- Five different soldering iron tips (900M series)
- Tin wire tube
- Soldering iron stand (steel)
- Anti-static Tweezer (ESD-15, length 4.7 Inches)
- Wire strippers’ cutters
- 24 AWG electric wire
- PU leather carry bag
A standard dual spring soldering iron holder with a sponge helps you during the soldering job; it has a safe base and maximum extent to avoid the user being burned or damaged. The solder sucker de-soldering pump has a high-pressure vacuum pump with an aluminum body frame; it helps you to remove solder from printed circuit boards through-hole solder joints.
You can carry this best soldering iron for printed circuit boards for DIY or repair anything everywhere with the help of a PU leather bag. The following pros and cons will help you to buy this product.
- Suitable for circuit boards
- Include all things you need for soldering
- Great value for the money
- The iron lasts for a long time
- It comes with nice solder and de-solder pump
- The stand is flimsy
- People with small hands have an issue holding the iron.