Introduction Of Soldering & Desoldering Tools

Soldering is a skill that is important for anyone interested in making electronics projects and electronic circuits. Generally, soldering techniques enable the solder joints to make. Still, the finished electronic project will look much better, and will like much better, and will be possible to take pride in the will overall job.

Soldering is very simple in construction, but it is very effective to make solder joints; it can make good reliable joints provided that the soldering has been done well in the first instance. In the soldering process, we need different tools to do the soldering job.

SOLDERING & DESOLDERING TOOLS

You can do soldering by using soldering iron, soldering station, and heat gun. They are different from each other in terms of soldering needs. The early thing you need to know is the wattage of soldering iron, which is the source of heat used to melt the solder.

Soldering iron with a wattage of 15W to 30W is better for the electronic and printed circuit board. If you are using a high-wattage soldering iron, then you are damaging your tool. If you want to solder heavy components and thick wires, you will need a soldering gun and heat guns.

For a beginner, a soldering iron of wattage 15W to 30W is the best choice for soldering. For a safe soldering process, you should choose a soldering iron with a 3-pronged grounded plug. The ground will help you to stay safe from static charges coming from the tip.

For a hobbyist, I would suggest the soldering stations, soldering guns, and heat guns; a variable power supply can control these soldering tools. The soldering by stations and guns is the same as the soldering iron with only the trigger is different.

Here is a small introduction to these soldering tools   

(a) Soldering iron:

Weller Soldering Iron
Weller SP40NKUS

It is an electrical device used for melting solder and applying it to metals needed to be joined. The soldering iron is made up of an insulated handle and a heated pointed metal iron tip. Good soldering depends upon how you can use the tip of the soldering iron. In most soldering iron, the tips are interchangeable; they are used for different purposes.

You can see our article about how to clean the tip of soldering iron.

(b) Soldering station:

Best Soldering Station For Circuit boards

A soldering station is a more advanced shape of soldering iron; if you are doing more soldering jobs, you need heavy-duty soldering jobs; you need the best soldering station. It consists of a unit that controls temperature and a soldering iron attached to it.

(c) Soldering guns:

best soldering gun

Most things require more heat to solder and de-solder, which cannot be done with soldering iron and soldering station. They need more power and heat to solder. A soldering gun can join stained glass, make jewellery, and do other heavy electronic work; it is more practical and cools quickly.

(d) Heat guns:

best heat gun

A heat gun is a device that emits steam from hot air, usually at a temperature between 100 C (212 F) to 760C (1400F). Heat guns are superb wherever you need heat; you can use them to remove paint and varnishes, bending plastic pipes, soldering copper pipe joints, and other automotive applications.

(e) Solder:

best solder

Solder is a metal alloy applied to create a bond between metal workpieces. It is used in the soldering process; solder is one of the vital tools for the soldering process. The selection of solder is essential; for electronic and printed circuit board rosin core is suitable. The acid core is best for soldering copper pipes and plumbing.

(f) Soldering tips:

Soldering  iron tips

There are different types of soldering tips for other purposes; you should know about the right tip for the soldering job you are doing. The most commonly used tips are in electronics projects are conical tips and chisel tips. The conical tip is used in small wattage soldering iron; screwdriver style tip is used in the high wattage soldering iron.

(g) Conventional or brass sponge:

tip care

Cleaning the tip is crucial in the soldering process; tips are oxidized during the soldering process, turning black. If they are not cleaned, they will not work as before; Therefore, we use the brass sponge to clean the tip. A conventional wet sponge can also be used to clean the tip, but it shortens the lifespan of soldering iron and drops the tip’s temperature.

(h) Soldering iron stand:

soldering iron stand

A primary tool for the soldering process; is the safest place to keep the soldering iron. When the soldering iron is too hot, you can keep the soldering iron in it, and it saves us from an accidental injury. A built-in stand comes in most soldering stations.

(I) Helping hands with magnifier:

 A helping hand is a stand with two or more clips that hold pieces for you. The clips will help you keep the items you are selling; the helping hand is generally known as the third hand. In some devices, there is a magnifier too, which magnifies the wires and shows it more transparent.

(j) Safety goggles:

Safety first!  Googles or safety shields must be worn before soldering. safety goggles protect eyes during the soldering process; Hot solder may fell into your eyes, fumes from soldering may also affect your eyes. Therefore it is necessary to wear a mask or goggles.

(k) Tools to work with wires:

Some of the tools are necessary to work on it, they help work with wires and electrical components. These tools consist of wires cutters, wire strippers, and pliers etc. these tools must be with you on your workbench to work on them.

(l) Tweezers

Tweezers help you to place small components properly in the printed circuit board; It avoids burning your hands when you are soldering. keep remembering! Always buy anti-static tweezers, it will save you from the flow of static charges.   

(m) USB Microscope:

USB microscope
USB microscope

 It helps you to magnify the soldering joints by microscope; it works on low power. With the help of a USB port, you can connect a computer and microscope, and starts your soldering process. It is easily adjustable and focuses on the object; it will ease your soldering process.

Tools for desoldering:

To err is human! There is a lot of chance for everyone to make mistakes during the soldering process. It would be best if you corrected these mistakes; for this reason, we use different tools to fix them. Here is a little introduction to the desoldering tools; it will make your work easier.

(o) Desoldering station:

best Hakko desoldering station

You can set the temperature to remove solder from the printed circuit board. A device is used to remove solder; it is controlled through the station. It has excellent precession and has perfect control over temperature.

(p) Hot-air Rework station:

hot air rework station
Hot-air Rework station

A rework station is used to heat the components and melt the solder. It can be used to complete the job fast and efficiently. Although it is a bit expensive than the desoldering station, it works more innovative and quicker.  

(q) Desolder Pump: 

desoldering pump

It is a manually operated device used to remove molten solder from a printed circuit board. The vacuum creates when you press the button, and it sucks the molten solder. It comes in two styles; bulb style and plunger style.

(r) Desoldering braid or solder wick: 

desolder wick

It is used to remove unwanted solder. A beginner should use solder wick to use the correct solder; it will control. Wick, desolder wick, solder braid, desoldering wick, and braided copper wire is commonly used name for it.  

Chip Quik:

chip quik
Chip Quik

Where to buy these tools?

You can buy these tools from any market; you can buy them from the local market, but we have a research team that has listed the best tools for them. also can buy it from this website bestsolderingirons.com; it will help you in purchasing these tools. 

 

Leave a Comment